MANUAL FOR TX-Multi ROLLING CODE REMOTE CONTROL
The TX-Multi remote control unit is designed to reproduce the rolling codes of nine different popular brands of remote control.
To use the TX-Multi for a specific brand, you will need to set a code for each button on the remote.
The remote will initially be programmed to factory settings, with each button set to NICE Smilo codes.
Changing the code brand for a button - Enter programming mode
| Action |
Result |
Hold down the two biggest buttons at the top of the unit for approximately 12 seconds |
The LED starts to flash |
Release both buttons |
The LED goes off and the unit is in programming mode |
Selecting the brand
| Action |
Result |
Hold down the button you wish to use |
The LED will flash the number of times equal to the brand that it is set for. (see table below) |
Release the button |
If the number of flashes is correct proceed to 'confirm selection and close programming mode' below. If it is not the brand you want proceed as follows:- |
To change the brand press the same button again and hold it down to count the number of flashes. |
The number of flashes will advance each time you press the button and the brand selected will change. |
When the LED flashes the required number of times stop pressing the button. (If you press it again the coding will change) |
The button is now reproducing the required rolling code, proceed to 'confirm selection and close programming mode' below. |
|
|
If you miss your code just continue pressing the button |
Once you reach the end the number of flashes will start again from the beginning |
For example, if the light flashes once it's NICE Smilo coding. If it flashes twice, it’s BFT coding (see table below for full list of brand codes).
Confirm selection and close programming
| Action |
Result |
Hold down the two smallest buttons at the bottom for approximately 7 seconds |
The LED will begin to flash slowly |
Release both buttons as soon as the LED starts to flash |
Your selection is now confirmed and your remote control is ready to use |
Programming mode of the TX-Multi is now closed and your remote control is ready for programming into the original receiver.
Please check your original receiver equipment instructions to find out how to programme your new unit into your receiver.
Tips
- When selecting the brand you can press the buttons while the LED is flashing. There is no need to wait for the LED to stop flashing. The brand is changed after every press of the button regardless of whether the LED has finished flashing.
- You can enter programming mode with the top two buttons, change all four buttons in turn and then confirm the selection and close the programming mode to complete the programming, you do not have to do each one separately.
- Each button can be a different brand if required.
- Buttons may be reprogrammed to a different brand at any time. Remember, every time you change the brand you will need to confirm the selection and close the programming mode
NOTE, for remote programming into BFT receivers, our equivalent of the HIDDEN KEY is as follows:
Hold down buttons ‘1’ and ‘4’ at the same time, after setting the brand as BFT, NOT BEFORE.
Resetting the unit
| Action |
Result |
Hold down the two smallest buttons at the bottom for approximately 15 seconds |
The LED will begin to flash slowly- then it will flash rapidly |
Release both buttons when the LED starts to flash rapidly |
The unit will be reset to factory settings (1 flash- NICE Smilo codes) on all four buttons |
COMPATIBILITY PANEL:
LED |
Brand |
LED |
Brand |
Flash |
|
Flash |
|
times |
|
times |
|
1 times |
1: NICE Smilo |
2 times |
2: BFT |
short |
|
short |
|
3 times |
3: BENINCA |
4 times |
4: DEA |
short |
ALLMATIC |
short |
|
5 times |
5: ERREKA |
6 times |
6: GiBiDi |
short |
Standard |
short |
|
7 times |
7: FOX |
8 times |
8: VARIO |
short |
|
short |
|
9 times |
9: Reserved |
1 long |
10: Reserved |
short |
for next |
flash |
for next |
1 long |
11: Reserved |
1 long |
12: Reserved |
& 1 |
for next |
& 2 |
for next |
short |
|
shorts |
|
Currently, only nine brands are available on the TX-Multi but new brands may be added. Numbers nine to twelve on the above table correspond to space available for new brands.
|
